ISO 11810-2:2007Withdrawn

Lasers and laser-related equipment — Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers — Part 2: Secondary ignition

Lasers et équipements associés aux lasers — Méthode d'essai et classification de la résistance au laser pour des draps chirurgicaux et/ou des couvertures de protection des patients — Partie 2: Inflammation secondaire

This edition has been replaced by ISO 11810:2015.

Abstract / scope

ISO 11810-2:2007 is applicable to disposable and re-usable, as well as woven and non-woven materials used as surgical drapes and/or patient protective covers which claim to be laser-resistant.

The purpose of ISO 11810-2:2007 is to provide a standardized method for testing and classifying surgical drapes and/or patient protective covers with respect to laser-induced hazards. An appropriate classification system is given. It is not the purpose of ISO 11810-2:2007 to serve as a general fire safety specification. ISO 11810-2:2007 is limited to testing the secondary ignition of materials that are rated I1 or I2 from ISO 11810-1.

All materials reflect portions of the beam and it is necessary for the user to decide whether specular reflection may be a hazard. This measurement, however, is not covered in ISO 11810-2:2007.

Life cycle

Replaced by

ISO 11810:2015PublishedLasers and laser-related equipment — Test method and classification for the laser resistance of surgical drapes and/or patient protective covers — Primary ignition, penetration, flame spread and secondary ignitionInternational Standard · Published 14 Dec 2015 · ISO/TC 172/SC 9