Skip to content

ISO 2100:1987Published

Aircraft — Electrical connectors — Tests

Aéronefs — Connecteurs électriques — Essais

Abstract / scope

Lays down test procedures and performance requirements. Gives test details relating to the procedure and test results required. Includes contact and insulation resistances, shell continuity, sealing, contact holding force, contact retention, low temperature handling, immersion at low air pressure, resistance to fluids, voltage proof, vibration, thermal shock, endurance, magnetic effect, climatic, acceleration, salt spray, dust, flammability etc.

Life cycle

Replaces

ISO 2100:1972WithdrawnTests for aircraft electrical plug and socket connectorsInternational Standard · Published 1 Dec 1972 · ISO/TC 20/SC 1

Replaced by

ISO/DIS 2100-100Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 100: GeneralInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-101Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 101: Visual examinationInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-102Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 102: Examination of dimensions and massInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-201Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 201: Contact resistance at low levelInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-202Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 202: Contact resistance at rated currentInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-203Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 203: Electrical continuity at microvolt levelInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-204Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 204: Discontinuity of contacts in the microsecond rangeInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-205Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 205: Housing (shell) electrical continuityInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-206Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 206: Measurement of insulation resistanceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-207Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 207: Voltage proof testInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-208Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 208: Temperature rise due to rated currentInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-209Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 209: Current temperature deratingInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-211Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 211: CapacitanceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-212Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 212: Surface transfer impedanceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-213Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 213: Shielding effectiveness from 100 MHz to 1 GHzInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-216Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 216: Engagement depth of contactsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-217Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 217: Voltage drop under specified current for terminal lugs and in-line splicesInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-218Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 218: Ageing of terminal lugs and in-line splices by temperature and current cyclingInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-219Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 219: Voltage strength for insulated terminal lugs and in-line splicesInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-301Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 301: Endurance at temperatureInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-302Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 302: Climatic sequenceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-303Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 303: Cold/low pressure and damp heatInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-305Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 305: Rapid change of temperatureInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-306Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 306: Mould growthInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-307Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 307: Salt mistInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-308Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 308: Sand and dustInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-309Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 309: Dry heatInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-310Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 310: ColdInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-311Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 311: Low air pressureInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-312Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 312: Air leakageInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-313Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 313: Artificial rainInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-314Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 314: Immersion at low pressureInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-315Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 315: Fluid resistanceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-317Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 317: FlammabilityInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-318Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 318: Fire resistanceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-319Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 319: Gastightness of solderless wrapped connectionsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-321Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 321: Damp heat, cyclic testInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-323Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 323: Thermal shockInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-325Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 325: Ice resistanceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-401Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 401: Acceleration, steady stateInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-402Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 402: ShockInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-403Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 403: Sinusoidal and random vibrationInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-404Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 404: Transverse loadInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-405Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 405: Axial loadInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-406Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 406: Mechanical enduranceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-407Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 407: Durability of contact retention system and seals (Maintenance ageing)International Standard · ISO/TC 20/SC 1 ISO/DIS 2100-408Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 408: Mating and unmating forcesInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-409Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 409: Contact retention in insertInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-410Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 410: Insert retention in housing (axial)International Standard · ISO/TC 20/SC 1 ISO/DIS 2100-411Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 411: Insert retention in housing (torsional)International Standard · ISO/TC 20/SC 1 ISO/DIS 2100-412Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 412: Contact insertion and extraction forces in and out of insertInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-413Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 413: Holding force of grounding spring systemInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-414Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 414: Unmating of lanyard release connectorsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-415Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 415: Test probe damage (female contact)International Standard · ISO/TC 20/SC 1 ISO/DIS 2100-416Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 416: Contact bending strengthInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-417Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 417: Tensile strength (crimped connection)International Standard · ISO/TC 20/SC 1 ISO/DIS 2100-418Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 418: Gauge insertion and extraction forces in and out of female contactInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-419Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 419: Stability of male contacts in insertInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-420Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 420: Mechanical strength of rear accessoriesInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-421Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 421: Free fallInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-422Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 422: Locking wire hole strengthInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-424Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 424: Stripping force, solderless wrapped connectionsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-425Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 425: Unwrapping, solderless wrapped connectionsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-426Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 426: Contact retention system effectiveness (removable contact walkout)International Standard · ISO/TC 20/SC 1 ISO/DIS 2100-427Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 427: Robustness of protective cover attachmentInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-428Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-501Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 501: Soft solderabilityInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-502Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 502: Restricted entryInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-503Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 503: Contact deformation after crimpingInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-505Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 505: Contact protection effectiveness (soop proof)International Standard · ISO/TC 20/SC 1 ISO/DIS 2100-506Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 506: Use of toolsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-507Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 507: Plating porosityInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-508Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 508: Measurement of thickness of coating on contactsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-509Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 509: Adhesion of coating on contactsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-512Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shellInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-513Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 513: Magnetic permeabilityInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-514Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 514: Solderability of contacts with self-contained solder and fluxInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-601Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 601: Optical elements — Insertion lossInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-602Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 602: Optical elements — Variation of attenuation and optical discontinuityInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-603Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 603: Change of power distributionInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-604Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 604: Optical elements — Cleaning capability of optical faceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-605Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 605: Optical elements — Return lossInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-606Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 606: Optical elements — CrosstalkInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-607Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 607: Optical elements — Immunity to ambient light couplingInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-609Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 609: Optical elements — Effectiveness of cable attachment — Cable cycling flexingInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-610Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 610: Optical elements — Effectiveness of cable attachment — Cable pullingInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-611Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 611: Optical elements — Effectiveness of cable attachment — Cable torsionInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-612Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 612: Optical elements — Effectiveness of cable attachment — Cable axial compressionInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-613Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 613: Optical elements — Impact testInternational Standard · ISO/TC 20/SC 1 ISO/CD 2100Deleted (project abandoned)Aircraft — Electrical connectors — TestsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-614Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 614: Optical elements — Connector radial compressionInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-615Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 615: Optical elements — Connection integrity at temperatureInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-617Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 617: Optical elements — Temperature cyclingInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6101Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6101: Optical elements — Visual examinationInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6301Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6301: Optical elements — Endurance at temperatureInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6303Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6303: Optical elements — Cold/low pressure and damp heatInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6305Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6305: Optical elements — Rapid change of temperatureInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6306Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6306: Optical elements — Mould growthInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6307Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6307: Optical elements — salt mistInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6314Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6314: Optical elements — Immersion at low pressureInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6315Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6315: Optical elements — Fluid resistanceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6316Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6316: Optical elements — Ozone resistanceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6317Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6317: Optical elements — FlammabilityInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6318Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6318: Optical elements — Fire resistanceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6321Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6321: Optical elements — Damp heat cyclic testInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6323Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6323: Optical elements — Thermal shock (Hermetically sealed devices)International Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6324Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6324: Optical elements — Interfacial sealingInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6401Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6401: Optical elements — Acceleration steady stateInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6402Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6402: Optical elements — ShockInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6403Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6403: Optical elements — VibrationsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6404Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6404: Optical elements — Transverse loadInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6405Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6405: Optical elements — Axial loadInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6406Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6406: Optical elements — Mechanical enduranceInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6414Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6414: Optical elements — Unmating of lanyard release optical connection elementsInternational Standard · ISO/TC 20/SC 1 ISO/DIS 2100-6415Deleted (project abandoned)Aerospace elements of electrical and optical connection — Test methods — Part 6415: Optical elements — Test probe damageInternational Standard · ISO/TC 20/SC 1 ISO/CD 2100Deleted (project abandoned)Aircraft — Electrical connectors — Design requirements and tests (de facto EN 2591)International Standard · ISO/TC 20/SC 1