81,768 ISO documents
ISO standards library
Search every ISO standard by number, title or topic — status, edition, committee, classification and scope, updated from ISO Open Data.
127 results
ISO 12164-1:2023PublishedHollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EBISO 12164-2:2023PublishedHollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EBISO 12164-3:2023PublishedHollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and UISO 12164-4:2023PublishedHollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and UISO 12164-5:2023PublishedHollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ESISO 12164-6:2023PublishedHollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ESISO 15488:2003PublishedCollets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensionsISO 19719:2010PublishedMachine tools — Work holding chucks — VocabularyISO 22402-2:2022PublishedMedium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 seriesISO 22402-1:2021PublishedMedium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 seriesISO 26622-3:2026PublishedModular taper interface with ball track system — Part 3: Dimensions of shanks for interface utilizing four locking elementsISO 26622-4:2026PublishedModular taper interface with ball track system — Part 4: Dimensions of receivers for interface utilizing four locking elementsISO 26622-1:2017PublishedModular taper interface with ball track system — Part 1: Dimensions and designation of shanksISO 26622-2:2008PublishedModular taper interface with ball track system — Part 2: Dimensions and designation of receiversISO 26623-1:2020PublishedPolygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanksISO 26623-2:2014PublishedPolygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receiversISO 238:1974WithdrawnReduction sleeves and extension sockets for tools with Morse taper shanksISO 296:1974WithdrawnMachine tools — Self-holding tapers for tool shanksISO 297:1982Withdrawn7/24 tapers for tool shanks for manual changingISO 299:1973WithdrawnMachine tool tables — T-slots and corresponding boltsISO 702-1:2001WithdrawnMachine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connectionISO 702-1:1975WithdrawnMachine tools — Spindle noses and face plates — Sizes for interchangeability — Part 1: Type AISO 702-2:1975WithdrawnMachine tools — Spindle noses and face plates — Sizes for interchangeability — Part 2: Camlock typeISO 702-3:1975WithdrawnMachine tools — Spindle noses and face plates — Sizes for interchangeability — Part 3: Bayonet typeISO 839-1:1976WithdrawnMilling machine arbors with 7/24 tapers — Part 1: Dimensions