81,768 ISO documents
ISO standards library
Search every ISO standard by number, title or topic — status, edition, committee, classification and scope, updated from ISO Open Data.
127 results
ISO 238:2016PublishedReduction sleeves and extension sockets for tools with Morse taper shanksISO 296:1991PublishedMachine tools — Self-holding tapers for tool shanksISO 297:1988Published7/24 tapers for tool shanks for manual changingISO 299:1987PublishedMachine tool tables — T-slots and corresponding boltsISO 702-1:2009PublishedMachine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connectionISO 702-2:2007PublishedMachine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock typeISO 702-3:2007PublishedMachine tools — Connecting dimensions of spindle noses and work holding chucks — Part 3: Bayonet typeISO 702-4:2004PublishedMachine tools — Connecting dimensions of spindle noses and work holding chucks — Part 4: Cylindrical connectionISO 839-1:2006PublishedMilling machine arbors with 7/24 tapers — Part 1: Dimensions and designationISO 839-2:1977PublishedMilling machine arbors with 7/24 tapers — Part 2: AccessoriesISO 1080:1975PublishedMachine tools — Morse taper shanks — Cotter slots with taper keysISO 3089:2005PublishedMachine tools — Test conditions for self-centring, manually operated chucks with one-piece jawsISO 3442-3:2007PublishedMachine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 3: Power-operated chucks with serrated jawsISO 3442-1:2005PublishedMachine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 1: Manually operated chucks with tongue and groove type jawsISO 3442-2:2005PublishedMachine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 2: Power-operated chucks with tongue and groove type jawsISO 3936:1993PublishedReduction sleeves with tenon drive with external and internal 7/24 taper — DimensionsISO 3937-1:2008PublishedCutter arbors with tenon drive — Part 1: Dimensions of Morse taperISO 3937-2:2008PublishedCutter arbors with tenon drive — Part 2: Dimensions of 7/24 taperISO 3937-3:2008PublishedCutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surfaceISO 4202:2016PublishedReduction sleeves with external 7/24 taper for tools with Morse taper shanksISO 4207:2016PublishedCounterbores with Morse taper shanks and detachable pilotsISO 4248:1978PublishedJig bushes — Definitions and nomenclatureISO 5413:1993PublishedMachine tools — Positive drive of Morse tapersISO 5414-2:2002PublishedTool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designationISO 5414-1:2002PublishedTool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks